Electrical discharge

FILTER ELEMENTS

TECNOCOMP industrial filter elements have been expressly studied for several industrial sectors applications. In particular, for Electrical Discharge Machines (EDM) a range of filtering cartridges suitable for micro-filtration of dielectric and cooling liquids has been set both for wire and dive sinking workings. Moreover, according to the recent directives on environment protection, TECNOCOMP has developed and introduced new filtering cartridges for EDM, completely burnable.

CONSTRUCTIVE FEATURES

  • Gasket:
    • cork-rubber for filter elements for water applications
    • special material for filter elements for hydrocarbons applications
  • Upper and bottom covers:
    • galvanized steel 6/10 or epoxy painted steel 6/10;
    • glass charged nylon.

Steel covers, as well as special nylon ones, are bonded to the pleated paper by a special resin high temperature resistant and particularly stable to the action of chemical agents.

  • Steel covers, as well as special nylon ones, are bonded to the pleated paper by a special resin high temperature resistant and particularly stable to the action of chemical agents.
  • Outer liner (if forseen) in galvanized steel 5/10, holes Ø 6,5 m/m; for some kind of filter elements, the outer liner is reinforced, by using a special perforating system.
  • Filtering media: pleated media composed by cellulose impregnated with phenolic resin, with a filtration range from 5 to 20 nominal µ and thin pasteboard discs mixed to synthetic fibres.
  • The special pleating system guarantees the stability of the structure, by mantaining its original shape for longtime, without loosing working filter area, with relevant consequences on the efficiency and life of filter elements, without adding any particular spacer.

EDM CARTRIDGES RANGE
(on request productions with dimension, filtering media and special junctions)

Tecno
Dimensions
µ
Style
Applications
(W) Wire (D) Dive sinking
Cross
Ref
O.D.
I.D.
H
TS 2503/1
150/32
40
253
15
B
 AEG, RFE, WALTER (T)
E25.32 PT
TS 2505/1
144,5/32
36
374
7
E
 AGIE, CHARMILLES, JUNG-JAPAX,
SEIBU-WALTER (F)
H 15190/16
E 10 WF 01
TS 2505/2
144,5/32
36
374
12
E
 CHARMILLES (F)
-
TS 2529
342
45
451
10
G
 FANUC, SODIK-MATRA (F)
-
TS 2529/4
342
45
451
5
G
 FANUC, SODIK-MATRA (F)
H 341158/2
TS 2529/50
150
89
451
5
G
 -
-
TS 2532
260
46
400
10
H
 BROTHER (F)
-
TS 2549
300
28
500
10
H
 BROTHER, DECKEL, MITSUBISHI,
NASSOVIA (F)
H 31967
TS 2549/1
300
58
500
10
L
 HITACHI (F)
-
TS 2561
300
46
340
10
H
 HITACHI (F)
-
TS 2562
260
48
280
10
A
 SODIK, MAKINO (F)
H 26644/1
TS 2562/1
260
48
280
10
B
 SODIK, MAKINO (F)
H 26644/1
E 280.46
TS 2646
150/32
40
350
10
A
 AEG, AGIE, CHARMILLES,
DECKEL, HANSEL, INGERSOLL,
JAPAX, JUNG, MITSUBISHI,
NASSOVIA, WALTER-SEIBU (F)
H 15190
H 1519/n
TS 2646/1
150/32
40
350
10
B
 AEG, AGIE, CHARMILLES,
DECKEL, HANSEN, INGERSOLL,
JAPAX, JUNG, MITSUBISHI,
NASSOVIA, WALTER-SEIBU (F)
H 15190
H 15190/n
E 10 WF 05
TS 2646/2
150/32
40
350
13,5
A
 AEG, AGIE, CHARMILLES,
JAPAX, JUNG, MITSUBISHI,
NASSOVIA, WALTER-SEIBU (F)
-
TS 2646/3
260/40
40
350
5
A
 MATRA, MITSUBISHI
-
TS 2646/4
260/40
40
350
5
A
 -
H 15190/6
TS 2648
195
30
362
10
A
 HANSVEDT, INGERSOLL (F)
-
TS 2649
340
46
300
3
I
 MITSUBISHI EDM FX20
-
TS 2649/2
340
46
300
10
L
 FANUC ALFA (ORIZZONTALE)
-
TS 2649/3
340
46
300
10
D
 FANUC (F)
E 300.46
TS 2672
150
30
356
>5
C
 AEG, AGIE, CDM, CHARMILLES,
CORNRAC, DECKEL, ELDIS,
ERODA, FEDERICI, HANSEN,
IMES, INGERSOLL, MICRO EDM,
NASSOVIA, SEIBU-WALTER, TMT (F)
CH56P
E 36.32 PT
TS 2698/1
137
36
470
6
F
 BÜTZBERGER
-
TS 2698/2
137
40
470
35
F
 BÜTZBERGER
-
TS 2702
150
30
240
-
C
 AEG, RFE, WALTER (F)
-

Link ai disegni tecnici degli stili: