ROLLER PLEATING MACHINE FOR NO-CURING PAPER PANEL FILTERS, ref. P.8

BASIC EQUIPMENT:

Structure provided with:

• Reel holder composed by an electro welded metal carpentry frame supporting a shaft on which the reel paper to fold is keyed, having a max diameter of 1000 m/m and a max width of 300 m/m.
• Pleating machine structured with an electro welded structural steel, with adjustable feet; a couple of smooth and idle rollers with guides and inlet plane for the paper. On this group, an end-stroke sensor is positioned so to stop the machine once the paper breaks or finishes; hot-melt dispenser holders, adjustable in height and depth, with a little tank for the collection of the drained hot-melt; rollers for the folding of the paper, placed on two axis, of which the bottom is motorized and the upper is idle, with adjustable bushes so to change the pressure on paper; transversally movable washers for the best adjustment towards the embossing; hard anodised ANTICORODAL 100 packing screws, assembled on holders for a vertical adjustment and on orthogonal slides for the adjustment of the horizontal plan.
• Conveyor belt composed by an electro welded metal carpentry frame characterized by a changeable speed synchronous to the speed of the paper when it exits from the pleating machine; the group is assembled on adjustable feet.
• Metal safety guards which close the bottom part of the frame of the pleating machine, with a hinged door to enter the motorized zone; other metal or polycarbonate safety guards can be added if necessary.
• Electric console board assembled on the front of the machine; the machine is managed through electromechanical components with speed and engine synchronism electronic control.
• Automatic transversal cut, with electronic control of the number of folds and electro pneumatic airbrush (optional).
• Couple of marking and embossing rollers for one pleat height according to the customers' needs.
• The machine is also provided with a Hot-melt dispenser composed by a Teflon container, three pre fusion areas, adjustable digital display and n° 2 double steel gear pumps, for a Hopper capacity of 16 Kg and 11 Kg Melt p. h.
• The machine can be equipped with pre-heating tunnel or plates on request.

TECHNICAL DATA:

• Working width m/m 300.
• Maximum pleating speed 100 linear meter per minute/1200 pleats per minute.
• Continuous system of lateral compression of the pleats.
• Electrical system 380 V, one phase + neutral, 50 Hz, auxiliary voltage 110 V and pneumatic system.
• Total installed power of the plant about KW 14.
• In conformity with CEE Directives 89/392, 91/368, 93/44, 93/68.
• Technical annexes: declaration of conformity according to the "Machine regulation" 89/392-CE in force, manual of instructions and maintenance complete with electric and pneumatic diagrams, CE marking according to the "Machine regulation" 89/392-CE in force .